There are many ways to craft rings (for those of you who can’t shape metal with your mind)!
One simple method is simply to drill a hole in an appropriately sized disc of metal, and mill it out on a lathe until it fits the desired proportions. A bit crude, not much room for artistry, but effective.
Another popular method is to hammer out a strip of metal (yes, for this step and this step only, one might see a smith bent over the anvil with a flatter) and coax it around a die until the ends meet and can be welded together. Welded rings can be very elaborate, set with stones, cut into lovely shapes, but depending on the strength of the bond and the delicacy of the materials, one might sacrifice durability.
And then there is my favorite and arguably the best method: metal casting! First one carves a model of one’s ring out of wax, making sure to leave in spurs as conduits for the wax to flow out of the mold and the metal to flow in. Then one encases the wax ring in molding material, secure within a mother-mold. Heating the mold burns out the wax, leaving a hollow inside mold in the shape of your ring. Then it is only a matter of pouring in the desired metals, letting them cool, and then completing the project by sawing off the spurs, filing down the metal, and adding whatever embellishments the design requires.
Naturally, one finished any fired piece by giving it a good pickling in acid and a high polish! Then you teach your friends the process, adding in a pinch of blood magic and sorcery, and murder them when they use your techniques to thwart your plans!
*cough*
In any case, none of the methods above will look like this:
Mashups and Exports 